|
tuning fork vibration hammer FRD -type |
The company produces
special hammer FRD -type shock tuning fork structure, can
produce four resonant audio, can be very good coverage in
reality the wires , ground vibration frequency range , after
the installation of shock hammer, wire , amplitude ground
amplitude decreased, and a stable oscillation frequency can
be formed particularly rare , can effectively control
various grades aeolian vibration , effectively deleted from
the wire surface fatigue , ensure that the wire , ground
life. |
Composition:
galvanized iron hammer, hot dip galvanized steel stranded
wire, aluminum alloy wire clamp, stainless steel bolts.
Function: eliminate or reduce cable operation due to the
influence of various factors to vibrate, the protection of
cable.
Features: 1 using Hello typical design, frequency protection
enough to spread from 6Hz-150Hz wide frequency band, and the
four resonant frequencies in the range.
2 hammerhead wheat suspension permanent adhesive, can
withstand the installation, repair, operation conditions of
mechanical load.
3 unique shape design, not ice water.
4 convenient installation, safety, damage caused by wrong
wire, wire.
5 shockproof hammer using corona proof design, can prevent
the occurrence of corona.
Vibration caused by factors: block space, tension, wind
speed, wind direction, wire and cable structure dimensions
etc..
Scope of application: applicable to the vibration of
overhead power line wire, wire inhibition.
![](images/10075.jpg)
![](images/10067.jpg)
![](images/10068.jpg) |
|
Home
Main products
Contact
If you have
questions or suggestions about this website, please send an email to
kxjhay@163.com.
Copyright (C) 2014 , Qufu Lite Lai Power Equipment Co., Ltd.
Shandong ICP No. 14031167
Last Modified: March 8 to 15 years |