|
cable cable rack
Towers ADSS / OPGW |
Strongly
recommended: my company launched a new ADSS/OPGW disk type
optical cable residual cable rack, light weight, convenient
use, firm and durable, is in the construction of optical
cable line choice, welcome friends to buy consultation! |
Usage: used for
placing surplus optical cable when connecting, the general
set up a joint box, with a residual cable rack. The residual
cable frame rod and the tower with two kinds, such as rod,
the need for the use of the rod diameter.
Cable connection is completed, the OPGW residual cable part
should be coiled in the residual cable rack, and is fixed on
the 5m from the ground Tata material or concrete poles, if
installed in the box substation led rod, connector box
installation height can be appropriately reduced, pay
attention to stagger the dropping type fuse and the
lightning arrester, ensure maintenance safety. Connection
box installation position should be higher than the residual
cable rack above 1m, for OPGW access. The residual cable
rack and a fixed clamp by the manufacturer (which provide
supporting tower frame, a residual cable downlead clamp
shall ensure that between OPGW and the tower grounding part
is insulated)
![](111123.jpg)
![](111123.jpg)
![](111123.jpg) |
|
Home
Main products
Contact
If you have
questions or suggestions about this website, please send an email to
kxjhay@163.com.
Copyright (C) 2014 , Qufu Lite Lai Power Equipment Co., Ltd.
Shandong ICP No. 14031167
Last Modified: March 8 to 15 years |